Riding lawn mowers are the best for the move and shape of your lawn in no time. When appropriately preserved, lawnmowers can work out for years. But what if you misplace the key or smash it while powering up? Or can’t you initiate your lawnmower? Well, in this article we will explain how to start a lawnmower with a screwdriver if you don’t have a yank.
These riding lawn mowers have ignition keys for two good reasons. They make available a safety function and work as a safety deterrence device. Sometimes a lawnmower key is lost or it can break the ignition. The case gets even worse when you don’t know how to start a keyless lawnmower. We will try to explain some effective ways, such as how to start a lawnmower with a screwdriver or with other tools.
A Complete Guide to Starting a Keyless Lawn Mower
The whole riding lawn mower comes with a key for you to start with no trouble. The key is an indispensable part of starting a riding lawnmower.
In addition to starting the mower, there are two reasons why all riding mowers come with a key. One is that it performs a protective function and the other is that it serves as a protective device.
Simply put, you can:
> Initiate a riding mower with a screwdriver
> Bypass the mower key switch with the flying wire
> Set up a new ignition switch
How to start a riding mower with a screwdriver
There are two techniques of using the screwdriver to avoid the typical starting of the wrench. For both techniques, it is significant to show off rubber ornament. If you don’t have them, buy them from Amazon.
Turn on the mower brake pedal and unfasten the mower blades.
Open the mower cover and position the battery and ignition coil.
Look for a small box hanging off the side of the engine cubicle.
Use the screwdriver for the bridge instrument.
If the opening between the starter and the solenoid trips, use a screwdriver as a jumper
Now stroke the two connectors with either end of the double-headed screwdriver.
Despite touching the screwdriver, the mower will finally start.
Try using the flathead screwdriver instead of the wrench.
Cautiously place the screwdriver in the keyhole.
Turn it in the hole like a wrench to start the mower.
The mower will start productively.
This method works on more than a few models of Cub Cadet and Craftsman lawnmowers. Now you know how to start a riding mower with a screwdriver.
Using a jumper to power the mower
Using a jumper is an effective way to start the mower without keys. But you have to be more careful when deciding to use a jumper. Because in this process you have to take care of the battery of the mower.
Before you start the mower, you need to have a few tools. Let’s see what you need to complete the whole process.
A flying thread
Battery terminal cleaners
Rubber hand gloves
Now follow the step-by-step process to finish the task smoothly.
- Place the mower on a level surface and put the mower in park mode. Also, unhook the mower blade. Activate all the mechanisms configured for safety measures so that the mower can remain stable in working time.
- Remove the mower engine cover and locate the mower battery.
- Disconnect the red and black wires from the solenoid 2 electrical terminals.
- Use the cleaner to remove any dirt and corrosion from the mower battery terminals.
- After cleaning, reconnect the two cables.
- Connect one end of the black jumper to the negative post of the mower battery. And put another end in any metal on the deck.
7. Now is the time to connect the red jumper wire. Connect one end of the red jumper wire to the positive post of the mower battery and touch the other end to the metal part of the mower starter.
- When you hear the sound of the mower engine starts, disconnect the red wire first. After that, also unplug the black color cable. Lower the mower engine cover and close it.
Made! Your lawnmower is now ready to mow.
Put a new lawnmower power switch in its place.
If you lose the key and do not have the proper knowledge of the processes mentioned above, replacing the mower ignition switch is the simple solution for you.
Sometimes lawn mower manufacturers do not provide a replacement key with the lawnmower. That is why it is the ultimate solution for you.
Just take your lawnmower to the nearest mower repair shop. The technician will remove the old or damaged ignition switch from the mower and install a new one. When you install a new ignition switch on your lawnmower, you will get a key to start the lawnmower.
That’s all. Your mower is ready to rule your lawn.
Important warnings and tips
Here are some important tips to keep in mind to get the best performance and maintenance from your mower.
Always place your mower in the right place and uphold it for optimum performance.
Do not leave your machine outside as weather conditions can cause rust or other problems on your machine. Use the lawnmower cover to store your mower securely in the shed.
Always use parts approved by the manufacturer for replacement.
Check the riding mower in a properly ventilated area for cleaning and inspection.
Remove the keys from the ignition when switching off the mower.
Frequently asked Questions
What do the letters on the back of a power switch mean?
The letters on the back of the ignition switch represent M = Magneto, S = Starter Solenoid, L = Lights.
How to test an ignition switch?
Open the fuse panel which is present under the steering wheel. Pull the fuse for a start signal with the fuse pullers on the panel.
Now check the metal strip to make sure it is not damaged or burnt. Open the hood and turn your current dial on the voltmeter to Volts.
When I turn my key in the ignition, nothing happens?
When you turn the ignition key and nothing happens. This means that the starter cannot crank the engine. It could be because the battery is dead.
Now choose the most suitable option from the above-mentioned processes. The options are not that hard to do, but you need to follow the instructions to avoid any kind of unforeseen accident.
Hope this article has given you the exact information on how to start a keyless lawnmower.