Mowing the lawn in your garden or patio is not easy. And it is especially difficult when the machine is malfunctioning and the cut is not as fast and smooth as it used to be. That’s why, as an avid gardener, you need to know the tips and tricks that will make your lawnmower experience easier than ever.
The side discharge when mowing is basically known as the easiest way to remove grass clippings, that being said, this means that while you are mowing, the clippings are easily thrown out from the side of your mower wireless lawnmower.
Side discharge mowers are designed to be opened when using their grass mower bags, the boom or side discharge door sits on the mower bag and allows the door to be closed rear discharge and place the compost plug in the side-discharge.
What is a Side discharge?
Mowing is extra contented when the grass is not too giant and broad. If you have to mow lofty, chunky grass, you will discover that your mower will move violently more. It is slower and necessitates more engine power. More wreckage gets wedged in the trimmer of the larger trimmer, increasing resistance and causing it to need more power or go slower. When the grass is to some extent damp or damp, this trouble is even more solemn. But there are solutions to this problem, using a side discharge.
Why do you need a side discharge on the mower?
Mowing the lawn is undoubtedly a tedious task and requires more than moderate effort, even for the simplest mowing. Some of the reasons why you should install a side discharge on your lawnmower are mentioned below.
When mowing long, dense beds, a side discharge would help cut even more easily and evenly.
If you want to cut wet grass, the side-discharge will give you a prompt.
A side discharge keeps the cutting process neat and tidy.
Clippings will not get stuck in the machine if you use a side discharge on your mower.
The discharge keeps the blade free of dust and grass residue.
Over time, you increase the efficiency and speed of your overall cutting process.
Tools needed to install a side discharge on the mower
Like any other repair job, you would need a few tools in the mower side discharge installation process. The necessary tools that you would need to install it are provided below,
Bolts and hooks
Bolts and hooks are essential items you would need to connect the side-discharge to the main mower.
Pipe wrench
This wrench would help you firmly connect the bolts and hooks to the mower.
A new side ejection of the lawn mower
If you don’t already have a lawn mower side discharge, you need to buy one for the job.
How to set up a side discharge on your mower: A complete guidance
pursues these uncomplicated steps to get the job done:
Step 1
Park your mower in an even, open area. Make sure the mower is twisted off. In the case of an electric lawn mower, you must unplug the power cord. In the case of a gasoline powered lawn mower, make sure that the mower cannot be accidentally started as you will be working near the blades during the installation procedure. Wearing safety gloves is a good idea to prevent your hands from being cut by sharp edges or the mower blade.
Step 2
There is a bracket running across the bottom of this deck on your lawn mower. You need to make sure the side discharge is under this bracket. To meet this requirement, press the lower part of the side discharge chute down.
Step 3
To make sure the side discharge adheres firmly to the deck, extend and tie the rubber ramp strap to the deck.
Step 4
You will now need to locate the area of the bridge where the ramp will be placed. A visual inspection would suffice in this regard, but you can always refer to the user manual to locate this area.
Step 5
The area assigned to the installation of the discharge chute will have bolt holes. If there is an old discharge chute that you are replacing, you will see that it is held in place with bolts. Remove these bolts with the socket wrench.
Step 6
The discharge chute can be covered with a compost plug. Pull the compost plug upwards and install the discharge chute. Carefully attach the hooks of the discharge chute to the handle of the compost plug. Tighten all bolts with the socket wrench, turning clockwise to tighten. Make sure all hooks are locked and all bolts are tight.
Step 7
If the discharge chute is not securely locked to the deck, it can be pulled out while the mower is running and potentially damage even the blades. To avoid this situation, make sure the discharge chute is secure. You can check this by shaking the ramp with your hand. If it is properly closed, it will not fall. If so, it means that a bolt or hook has slipped or lost.
Step 8
Once you have verified that the side discharge chute is securely attached to the mower, carefully lower the compost plug. You have completed a side discharge installation process with this step completed and your mower is ready for use.
Benefits of side discharge:
Makes it easier to cut long, thick and wet grasses.
The side discharge does not trap the grass in the cutting area.
Keeps the blade free from grass clippings.
Its use saves time and increases the efficiency of the workflow.
Drawbacks of side discharge:
Sometimes the side discharges make it difficult to see the large stones that can break the blade as it enters the mower’s cutting area. Large rocks can hit you if they get into the mower’s cutting area. Therefore, before using the lawn mower, remove large stones from your lawn.
Conclusion
Working with the mower is a definite challenge, and nothing will give you a smoother finish than a side discharge chute. No matter the size and extent of your lawn, a side discharge will make your mowing experience enjoyable!
If you want information on installing the side discharge on the mower, you must learn how to do it correctly. Follow our blogs for all your gardening requests!