Installing a crucial solid-state disk (SSD) Is very easy and makes your PC or computer significantly faster or quicker. Follow the steps below, which help you to speed up your storage.
The first and foremost thing is that clearing your workspace helps prevent the buildup of static electricity that could damage or destroy your new drive.
You will need your computer or PC, a screwdriver, and your new crucial solid-state disk (SSD), and your computer’s owner’s manual as well.
Backup important or essential files:
Before starting the install process, you must save any important files on your computer or PC to an external storage drive and USB flash drive or cloud storage as well.
Go slowly and Deliberately:
In fact, the information you need is all here. Your computer or laptop will likely look at different ass compared to the ones shown. But, the process is similar. Read each step thoroughly and consult our helpful tips for more information.
Solid-state disk (SSD) support and drivers are not available for Windows 7. Your computer or PC or motherboard manufacturer might be able to add support respectively. There’s also a hotfix available from Microsoft that can be applied to natively support solid-state drives (SSD) for Windows 7.
Install The Solid-State Disk
Shut down your system first:
Turn off your computer or PC and laptop completely.
Remove power cable and battery as well:
Now you can remove the power cable and battery as well. The battery removal step applies to laptops when it is possible to remove the battery easily. Additionally, to see how to remove the battery, refer to your owner’s manual.
Discharge residual power:
If your laptop or computer has a removable battery, remove it, then hold the power button for 5 seconds to discharge any electricity left in the computer or PC.
Open the case:
How you do this will vary from computer to computer, so consult your owner’s manual for exact instructions.
Touch an unpainted metal surface to the ground surface yourself. Because this protects your computer’s or PC components from the static electricity that is naturally present in your body, and the grounding is an extra safeguard.
Locate the M.2 PCI-E slot:
This M.2 slot is usually easy to find on a desktop, but in the laptops, the location will vary, and it is typically under the bottom panel or under the keyboard as well. Moreover, refer to your owner’s manual for an exact location as every system looks different.
Insert the solid-state disk (SSD):
Depending on your computer or PC, there might be a heat sink, and a screw needs to be removed prior to inserting your new solid-state disk (SSD). To insert your crucial solid-state disk(SSD), then you can hold the solid-state disk (SSD) carefully by the sides.
Keep in mind that don’t touch the gold connector pins. The align notches in the solid-state disk (SSD) with the ridges in the PCI-E slots, then insert at a 30-degrees angle and do not force the connection as well.
Furthermore, to secure the drive, it might be necessary to insert the screw into the provided mount on the motherboard and remember that don’t overtighten the screw.
Reassemble your system:
After the solid-state disk (SSD) is securely or safely in the slot, then put your computer or PC back together and reconnect the battery if it was removed.
Turn on your computer or PC:
You can turn on your computer or PC. Unless you removed your old storage drive in the previous step, then the computer or PC is booting from the old drive as well. And, part 3 will walk you through how to lone your data to use your new solid-state drive to boot up.
With a few motherboards, you might see some messages about configuring to increase the speed of solid-state disks (SSDs) or about enabling and disabling shared bandwidth of SATA port and the NVMe ports as well.
Although, this isn’t malfunction. You can configure your hardware for optimal performance and avoid malfunctions by obtaining information about your motherboard from the manufacturer.
Copy your data:
The longest or the widest part of the solid-state disk install process is copying everything from your old drive to your new solid-state disk (SSD). Before you start, you can get of how long this’ll take by referring to our chart below.
Amount of data on old drive Estimated time to copy new drive
- Less than 256GB 20 to 30 minutes
- 256GB to 512GB 30 to 60 minutes
- 512GB to 1TB 60 to 90 minutes
- More than 1TB up to 90-minutes
Download the cloning software:
On the computer or PC with the solid-state disk (SSD), then go to the cloning software website to download the software that’ll copy your old solid-state disk to your new solid-state disk. So, this software comes free with Crucial solid-state disks (SSDs).
Install the software that you downloaded:
Firstly, open the file you downloaded and accept all of the prompts. Additionally, the screen will then pop up, and you can click the install button. After the installation of the software is complete, then start the application.
Prepare to copy your data:
You will now see several options in the software. Select the clone disk option, and you will then be asked to select a clone mode. If you have done this before, then we recommend the automatic method, then click the next button.
Select source and destination drives:
Your source drive is your existing drive. You can select it by clicking it, then click the next button. Now select your destination drive, such as the new solid-state, disk and also click the next button. On the following screen, then click proceed to start copying your data.
Wait for your data to copy;
It will take a while for everything to copy, but the Acronis software will keep you updated on the progress.
Change your primary and boost drive:
When everything has copied over, then you will need to tell your OS operating system to use your new solid-state disk as the primary drive. So, this can be done by removing the old solid-state drive, which will force your system to use the new solid-state disk (SSD).
Also, check the computer’s or PC’s owner’s manual or contact the computer or PC manufacturer for instruction on how to change the primary drive respectively.
Have some fun:
See how fast or quick your favorite applications when you click on them. Your solid-state disk is installed, but you can make it even faster or quicker by enabling a special feature.
If you add an old solid-state drive is 128GB, and you copy its content to a 275GB solid-state disk (SSD). The solid-state disk may show up in your system as a 128GB drive even though it is actually the size that you may buy.
No need to fear, you can also store more on it, but you will need to make some adjustments to the drive’s setting. This does not usually happen, but if it does, then we want to let you know that it is OK and that it is based on your system, not you.
Frequently Asked Questions(FAQs):
Does M.2 solid state disk need a screw?
The M.2 stick didn’t lie flat against the motherboard. That is why I recommend trying an M.2 X 6mm screw first.
Why would not my M.2 SSD show up?
If option 1, you’ll need to make sure the drive has been added through the device manager. If option 2, then I would recommend updating the BIOS and see if that helps. 2 drive is showing up in the BIOS and device manager now, but not the file explorer too.
Why’s M.2 SSD so expensive?
M.2 is a newer or the latest physical form factor that enables smaller drives. They come, however, with different interfaces, and a few of them enable very high data transfer speeds, and thus they are much more expensive than the 2.5-inches SATA drives. And 2, it’s most likely a SATA interface M.
Do you need a heatsink for M.2?
When it’s easy to install and forget about your NVMe solid-state disk, then these drives can and will overheat critically even during normal day-to-day use. If your motherboard does not come with an M.2 solid state disk heatsink, then you might want to look at aftermarket options.
Why’s my solid-state disk not being detected?
The BIOS will not detect a solid-state drive if the data cable is damaged or the connection is incorrect. Moreover, the serial ATA cables, in particular, can sometimes fall out of their connection, and be sure to check your SATA cables are tightly connected to the SATA port connection.
Which M.2 slot should we use?
Just use whatever you would like. There’s no difference except disabling SATA ports. Given that the M.2 slots on a Z390 motherboard go through the PCH. There’s no difference between them.